SWMM 3,4 to 5 Converter Interface

SWMM 3,4 to 5 Converter Interface

The SWMM 3 and SWMM 4 converter can convert up to two files at one time to SWMM 5. Typically you would convert a Runoff and Transport fileto SWMM 5 or a Runoff and Extran File to SWMM 5. If you have a combination of a SWMM 4 Runoff, Transport and Extran network then you will have to convert it in pieces and copy and past the two data setstogether to make one SWMM 5 data set. 

The x,y coordinate file is only necessary if you do not have existing x, ycoordinates on the D1 line of the SWMM 4 Extran input data set.


You can use the command File=>Define Ini File to define the location of the ini file. The ini file will save your conversion project input data filesand directories.




You can use the command File=>Define Your Text Editor to define the location of the text editor program. The ini file will save your conversion project editor name.




You can get a copy of the latest SWMM 3,4 to 5 Converter

Or download the  DOS  version  of  XP-SWMM to  SWMM5 XPtoEPA4_2005.exe

E-mail me when people leave their comments –

You need to be a member of SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM to add comments!

Join SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM

Comments

This reply was deleted.