"At the Summit of Olympus Mons
Credit: G. Neukum (FU Berlin) et al., DLR, ESA
From martian orbit, the Mars Express cameras looked down on the largest volcano in the solar system. The result was this stunningly detailed overhead view of the…"
SWMM5 - Stormwater Management Model
SWMM 5, InfoSWMM, H20MAP SWMM, InfoSewer for Water Quality,Hydrology, Hydraulics
Top Content
Latest Activity
- Top News
- Everything
Robert Dickinson replied to Robert Dickinson's discussion How is the St Venant Equation Solved for in the Dynamic Wave Solution of SWMM 5?"Subject: Link Iterations in the SWMM 5 Dynamic Wave Solution
Each of the links in the SWMM 5 network can use up to 8 iterations to reach convergence during a time step in the dynamic wave solution of SWMM 5. The rules…"
Robert Dickinson left a comment for wu ze jian"Hi, I added this discussion http://swmm2000.com/forum/topics/how-is-the-st-venant-equation-solved-for-in-the-dynamic-wave-solu"
Robert Dickinson posted a discussionHow is the St Venant Equation Solved for in the Dynamic Wave Solution of SWMM 5?
Subject: How is the St Venant Equation Solved for in the Dynamic Wave Solution of SWMM 5? An explanation of the four St. Venant Terms in SWMM 5 and how they change for Gravity Mains and Force Mains. The HGL is the water surface elevation in the upstream and downstream nodes of the link. The HGL for a full link goes from the pipe crown elevation up to the rim elevation of the node + the surcharge depth of the node. The four terms are: dq2 = Time Step * Awtd * (Head Downstream – Head Upstream)…See More
Robert Dickinson added a page to the group Hydraulics
Force Main Friction Loss in InfoSWMM and the Transition from Partial to Full Flow
Subject: Force Main Friction Loss in InfoSWMM and the Transition from Partial to Full Flow
You can model Force Main friction loss in InfoSWMM using either Darcy Weisbach or Hazen Williams as the full pipe friction loss method (see Figure 1 for the…
Robert Dickinson's blog post was featuredSWMM 5 Precipitation Options
Subject: SWMM 5 Precipitation Options You can have design storms, monitored storms of any length of the time from minutes to centuries, use intensity, volume or cumulative precipitation, use both rainfall and snowfall in the same rain gage depending on temperature, use both time series or external files for the rain gage and have unlimited rain gages with the limitation of one rain gage per subcatchment. …See More
Robert Dickinson posted a blog postSWMM 5 Precipitation Options
Subject: SWMM 5 Precipitation Options You can have design storms, monitored storms of any length of the time from minutes to centuries, use intensity, volume or cumulative precipitation, use both rainfall and snowfall in the same rain gage depending on temperature, use both time series or external files for the rain gage and have unlimited rain gages with the limitation of one rain gage per subcatchment. …See More
Robert Dickinson commented on Robert Dickinson's group Stream of Information"Pacheena Indian Reserve, British Columbia, Canada
May. 25, 2012
"
Robert Dickinson commented on Robert Dickinson's group Stream of Information"All the Water on Europa Illustration Credit & Copyright: Kevin Hand (JPL/Caltech), Jack Cook (Woods Hole Oceanographic Institution), Howard Perlman (USGS)
Explanation: How much of Jupiter's moon…"
Robert Dickinson commented on Robert Dickinson's group Water Quality"URBAN STORMWATER QUANTITY/QUALITY MODELING USING THE SCS METHOD AND EMPIRICAL EQUATIONS†
http://onlinelibrary.wiley.com/doi/10.1111/j.1752-1688.1997.tb04093.x/abstract
May 24, 2012
Wiley Online Library will be disrupted on 26 May from…"
Robert Dickinson commented on Robert Dickinson's group Water Quality"Hi MeHa, Here is one good source of data, I also have the SWMM 5 models for the USGS areas.
http://www.1000friendsofflorida.org/pubs/stmarksgreen/apend4.asp
http://sofia.usgs.gov/publications/ofr/78-324/ofr-78-324.pdf
"
MeHa commented on Robert Dickinson's group Water Quality"I want to model WQ of sewers. Can any body provide me a network with real measured calibration files? "
MeHa posted a status"Hello, When designing a sewer system, we consider the Node Flooding and Conduit surcharge in the status report. Is there any guideline which"
Quah Soon Tong left a comment for Esther Bergareche Auricenea"Hi Esther, I am not sure you are the same Esther that was at the United World College in South Wales with me. I am Quah Soon Tong from Singapore. I noticed you are also an engineer. I did Civil Engineering at Cambridge University, but practised as…"
Robert Dickinson commented on Robert Dickinson's group Stream of Information"River Canyon
May. 23, 2012
"
Robert Dickinson commented on Robert Dickinson's group Stream of Information"Litla Dimun, Faroe Islands
May. 23, 2012
"
Aquifer in SWMM
- Rating: No Rating
does anybody here know well about Aquifer-Module in SWMM 5? which algorithms are used to model subsurface processing (aquifer)? thanks
Replies to This Discussion
-
Permalink Reply by Robert Dickinson on -
Here is some information
Nov 12, 2011There is a Groundwater data object associated with a Subcatchment that describes flow equations, the interaction between the Subcatchment infiltration and the Groundwater component and an Aquifer data object that ...Jul 31, 2011The Groundwater flow in SWMM 5 Groundwater. Subject: The Groundwater flow in SWMM 5 Groundwater. The Groundwater flow in SWMM 5 is actually made up of three components: 1. A groundwater flow computed from the ...Jun 19, 2011A large difference between SWMM 5 and SWMM 4 is how the Groundwater Aquifer interacts with the drainage network. In SWMM 4 since the hydrology was simulated in the Runoff Block, the results saved to an interface file and ...Oct 20, 2010SWMM5 Groundwater Flow Components. Note: There are three sub flow components in the calculation of the groundwater flow from a SWMM 5 Subcatchment. 1st Component: Flow = Groundwater Flow Coef. ...Jun 19, 2011A large difference between SWMM 5 and SWMM 4 is how the Groundwater Aquifer interacts with the drainage network. In SWMM 4 since the hydrology was simulated in the Runoff Block, the results saved to an interface file and ...
-
Permalink Reply by Zhao Chen on -
thanks a lot!
it would be better, if you can tell me, which algorithms (mathematical formula) are used to be model the aquifer in subsurface. I can only find the formula about the groundwater processing in SWMM manual but not part of aquifer.
Robert Dickinson said:Here is some information
Nov 12, 2011There is a Groundwater data object associated with a Subcatchment that describes flow equations, the interaction between the Subcatchment infiltration and the Groundwater component and an Aquifer data object that ...Jul 31, 2011The Groundwater flow in SWMM 5 Groundwater. Subject: The Groundwater flow in SWMM 5 Groundwater. The Groundwater flow in SWMM 5 is actually made up of three components: 1. A groundwater flow computed from the ...Jun 19, 2011A large difference between SWMM 5 and SWMM 4 is how the Groundwater Aquifer interacts with the drainage network. In SWMM 4 since the hydrology was simulated in the Runoff Block, the results saved to an interface file and ...Oct 20, 2010SWMM5 Groundwater Flow Components. Note: There are three sub flow components in the calculation of the groundwater flow from a SWMM 5 Subcatchment. 1st Component: Flow = Groundwater Flow Coef. ...Jun 19, 2011A large difference between SWMM 5 and SWMM 4 is how the Groundwater Aquifer interacts with the drainage network. In SWMM 4 since the hydrology was simulated in the Runoff Block, the results saved to an interface file and ...
© 2012 Created by Robert Dickinson.
Powered by
