All Forums

Replies

  • Robert Dickinson September 26, 2017 at 3:46pm

    Many of these files runoff44, runoff45, runoff46, runoff47 etc  come from this reference

    https://pubs.usgs.gov/sir/2004/5191/report.pdf

    https://pubs.er.usgs.gov/publication/wri801

    Abstract

    Urban stormwater data from four Miami, Fla. catchments were collected and compiled by the U.S. Geological Survey and were used for testing the applicability of deterministic modeling for characterizing stormwater flows from small land-use areas. A description of model calibration and verification is presented for: (1) A 40.8 acre single-family residential area, (2) a 58.3-acre highway area, (3) a 20.4-acre commercial area, and (4) a 14.7-acre multifamily residential area. Rainfall-runoff data for 80, 108, 114, and 52 storms at sites, 1, 2, 3, and 4, respectively, were collected, analyzed, and stored on direct-access files. Rainfall and runoff data for these storms (at 1-minute time intervals) were used in flow-modeling simulation analyses. A distributed routing Geological Survey rainfall-runoff model was used to determine rainfall excess and route overland and channel flows at each site. Optimization of soil-moisture- accounting and infiltration parameters was performed during the calibration phases. The results of this study showed that, with qualifications, an acceptable verification of the Geological Survey model can be achieved. (Kosco-USGS)

  • Robert Dickinson September 26, 2017 at 2:04pm

    I have updated the files to work better in SWMM 5.1.012 - there were a lot of pollutant and land use changes.  The keyword POLYGON has to be switched to POLYGONS as well.

  • Robert Dickinson September 26, 2017 at 7:02am

    Email me the file to robert.dickinson@gmail.com and i will fix it for you.  I think you are using an older version of this model (made in an earlier SWMM5)

  • Robert Dickinson September 26, 2017 at 6:07am

    Try adding an S to the end of Polygon using a text editor

    [POLYGONS]

    1 11789050.303497 6986680.368074
    1 11788930.303497 6986680.368074

  • shaho April 29, 2017 at 5:04pm

    HOW CAN I UNE SWMM FOR CALCUL USE WATER FLO

    • Robert Dickinson > shaho April 29, 2017 at 6:05pm

      I would useVEPANET or InfoWater to simulate Water Flow.

  • Robert Dickinson February 26, 2017 at 12:03pm

    Do you mean DWF? or Dry Weather Flow?

    • MESKINE > Robert Dickinson February 28, 2017 at 10:08pm

       Dry Weather Flow

  • MESKINE February 26, 2017 at 11:17am

    HOW CAN I UNE SWMM FOR CALCUL USE WATER FLOW

  • medrik vayspanah April 15, 2016 at 3:28am

    Example2_Post.inp.

    for define pipe and street and swales

This reply was deleted.