SWMM 5, InfoSWMM, H20MAP SWMM, InfoSewer for Water Quality,Hydrology, Hydraulics
Robert Dickinson commented on Robert Dickinson's group Stream of Information
Robert Dickinson commented on Robert Dickinson's group Stream of Information
Robert Dickinson added a page to the group SWMM4 Input Files
Robert Dickinson commented on Robert Dickinson's group SWMM4 Input Files
Robert Dickinson added a page to the group Blog Links
Robert Dickinson commented on Robert Dickinson's group Stream of Information
Robert Dickinson commented on Robert Dickinson's group Weather
Robert Dickinson commented on Robert Dickinson's group Weather
Robert Dickinson commented on Robert Dickinson's group Weather
Robert Dickinson posted a video
Robert Dickinson commented on Robert Dickinson's group ExtraVariables
Robert Dickinson replied to Robert Dickinson's discussion How is the St Venant Equation Solved for in the Dynamic Wave Solution of SWMM 5?
Robert Dickinson left a comment for wu ze jian
Robert Dickinson posted a discussionSubject: Reserve Capacity and Flow in a Link
The Reserve flow and Reserve Capacity are modeling guidelines and do not actually influence the computed flows in a link. If you have a positive Reserve flow or capacity then you MAY get more flow in the link based on the current flow being less than the Qfull for the link but not if the link is under surcharge, has backwater conditions or has large entrance and exit losses. You cannot always assume that because the Reserve flow is positive the link can handle more upstream flow.
Here are few graphs that show the relationship between Qfull, the actual Q in the link and the Reserve Flow or Reserve Capacity. The Qfull is a reference flow and is not used during the computation in InfoSWMM and SWMM5.
Condition 1: Positive Reserve Flow – the flow is always less than Qfull and the Reserve flow and Reserve Capacity are Positive.
Condition 2: Negative Reserve Flow – the flow is sometimes greater than Qfull and the Reserve flow and Reserve Capacity are negative when this occurs.
Reserve Capacity – the Reserve in the link * the current link volume.
© 2012 Created by Robert Dickinson.
Powered by
You need to be a member of SWMM5 - Stormwater Management Model to add comments!
Join SWMM5 - Stormwater Management Model