Leaping Weir Example in SWMM 5 and InfoSWMM, Alternative

This is an example SWMM 5 model that can be imported into InfoSWMM or H2OMap SWMM using the Exchange/Import Command.   The low flow falls over the berm of the leaping weir into a rectangular open channel but the the "falls" is governed by an OULET Depth/Discharge Type in SWMM 5.  The flow increases in the OUTLET until a depth of 1 feet is reached where the weir starts to operate.  The OUTLET increases in flow from zero to 1 feet but still flows at a reduced rate when the weir starts to operate.  The weir stops flowing when the depth goes below 1 foot on the berm.


Leaping Weir With Low Flow Depth/Discharge OUTLET

You need to be a member of SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM to add comments!

Join SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM

Email me when people reply –