Rule 1
IF SIMULATION TIME >= 0
THEN ORIFICE UnderdrainPipe SETTING = 0
PRIORITY 1
Rule 2
IF NODE GravelSU DEPTH > 0.6
THEN ORIFICE Backtosoil SETTING = 1
ELSE ORIFICE Backtosoil SETTING = 0
PRIORITY 2
My intentions are: Rule 1, The orifice "UnderdrainPipe" st
Read more…I want to control opening and closing of an orifice depending on the flow in a downstream link. I want to close the orifice for 15min if the flow in the d/s exceeds say 50 LPS, after 15 min I want to check again the flow in the link and adjust the op
Read more…How do I get the piezometric head ( pressure + elevation head) of the nodes in the result of SWMM 5? Is there options for this or something has to be implemented in the source code of SWMM5 ? Please throw some light in this regard.
Read more…Subject: How is the Orifice Setting Used in SWMM 5 RTC Rules?
The Real Time Control Rule for Orifice Setting can be a function of a Setting constant, Setting from a Curve, Setting from a PID controller and a Setting from a Time Series (Figure 1).
Read more…Hello Members,
In this network network_00.zip, the orifice is closed and then reopened. The very moment it is reopened, you observe that there is a sudden peak raise in the flow through it. I would attribute this peak to;
