All Forums

Subject:   How to Easily Make a Smaller Model in InfoSWMM Using Trace Upstream and Downstream Network

 

Step 1.  Use the Trace Upstream Network command to find all of the network above the node of interest (Figure 1). 

Step 2.  Use the Trace Downstream Network Command to find all of the network below the node of interest and place it in the Doman (Figure 2).

Step 3.  Use Facility Manager to make the Lower Network in the Domain Inactive (Figure 3).

Step 4.  Change the Node of Interest from a Manhole to an Outfall

 

 

Image001
Figure 1.  Trace Upstream Network

Image002
Figure 2.  Put the lower Section of the Network in a Domain 

 

Image003
Figure 3.  Use Facility Manager to make the Lower Network in the Domain Inactive

 

You need to be a member of SWMM 5 or SWMM or EPASWMM - (not formally associated with EPA) to add comments!

Join SWMM 5 or SWMM or EPASWMM - (not formally associated with EPA)

Email me when people reply –