How is the Maximum Link Flow Applied in SWMM 5?

Subject:  How is the Maximum Link Flow Applied in SWMM 5?

 

The maximum flow limit for a link applies to the kinematic wave and the dynamic wave solution.   The inflow to the link  in the kinematic wave solution is limited (Figure 1) but the calculated link flow is limited in the dynamic wave solution after the link flow (Figure 2):

 

1.       Is checked using the Culvert Inlet Equations (optional)

2.      The normal flow equation is checked (internally optional depending on the Normal flow options) and

3.      The Picard iteration solution under relaxation parameter (always 0.5) is applied (Figure 3).

 

Figure 1.  Kinematic Wave Solution Limits the Inflow to  the Link Maximum limit.

Image008

Figure 2. Dynamic Wave Solution link  flow limit.

Image009

Figure 3.  The Link  flow in the dynamic wave solution has three checks at each iteration in a time step.

Image010

E-mail me when people leave their comments –

You need to be a member of SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM to add comments!

Join SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM