Three Hidden Secrets to Speeding up your SWMM 5, H2OMAP SWMM or InfoSWMM Model

 

Image004

Minimum Time Step               Average Time Step        Maximum Time Step

 

Minimum Time Step (sec)             0.984

Average Time Step (sec)              9.071

Maximum Time Step (sec)            30.000

Percent in Steady State (%)          0.000

Average Iterations per Time Step  4.821


Use a maximum time that will lower your average iterations per time step to speed up the simulation,decrease the maximum time step to lower the number of iterations, use equivalent conduit lengthening to increase

Image005

 the minimum time step, the model is fastest if the minimum and maximum time steps are not too small or large compared to the average time step.  Adjust the stopping toleranceand the number of iterations if you can to speed up your model

Image006

You can also decrease the number of iterations or the stopping tolerance to speed up the model or improve the continuity error of the model.   If you are doing a continuous simulation then you can have a reduced graphical output data set to speed up the simulation

  

Image007

 

If you have a duo or quad core computer another option to speed up the simulations is to use 1, 2, 3 or 4 cores for the simulation

Image008

 

E-mail me when people leave their comments –

You need to be a member of SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM to add comments!

Join SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM