How to Use the Map Display for the Maximum Adjusted d/D or Maximum q/Q in an EPS InfoSewer Simulation
You can do a Map Display of the adjusted d/D values (Figure 1) from the Gravity Main Range Report (Figure 2) to show those pipes that are full thematically. For example, the links in red in Figure 1 show the effect of the pump blockage and the links in green are those NOT full due to the pump blockage. You will need to copy the adjusted d/D or the maximum q/Q values from the Range report to the Link Information Table to have some values to Map (Figure 3 and 4). The maximum adjusted d/D or the Maximum q/Q can be mapped using the new link information (Figure 5).
You can do a Map Display of the adjusted d/D values (Figure 1) from the Gravity Main Range Report (Figure 2) to show those pipes that are full thematically. For example, the links in red in Figure 1 show the effect of the pump blockage and the links in green are those NOT full due to the pump blockage. You will need to copy the adjusted d/D or the maximum q/Q values from the Range report to the Link Information Table to have some values to Map (Figure 3 and 4). The maximum adjusted d/D or the Maximum q/Q can be mapped using the new link information (Figure 5).
 |
| Figure 1 Map Display of the Maximum Adjusted d/D from the Gravity Range Report. |
 |
| Figure 2. Maximum Adjusted d/D or Maximum q/Q can be copied from the EPS Range Gravity Main Report. |
 |
| Figure 3. Create a new variable In the Link Information Table. |
 |
| Figure 4. New variables for the Map Display from the Range Report in the Pipe Information Tables for Each Link. |
 |
| Figure 5. Link Information new Parameters of Variables can be used to Display the maximum d/D or q/Q during the EPS simulation. |
Replies