All Forums

rtc (2)

How to Use Two Control Curves in SWMM 5 to Simulate a Head Difference Rule

Subject: How to Use Two Control Curves in SWMM 5 to Simulate a Head Difference Rule

The SWMM 5 control rules for Real Time Control (RTC) do not allow the rule to be governed by the head across the orifice but does allow rules based on the depth,

How is the Orifice Setting Used in SWMM 5 RTC Rules?

Subject: How is the Orifice Setting Used in SWMM 5 RTC Rules?

The Real Time Control Rule for Orifice Setting can be a function of a Setting constant, Setting from a Curve, Setting from a PID controller and a Setting from a Time Series (Figure 1).

Hello, you need to enable JavaScript to use SWMM 5 or SWMM or EPASWMM and SWMM5 in ICM_SWMM.

Please check your browser settings or contact your system administrator.

How to Use Two Control Curves in SWMM 5 to Simulate a Head Difference Rule

How is the Orifice Setting Used in SWMM 5 RTC Rules?

Note: this page contains paid content.