|
Engine Error Number |
Description |
|
ERROR 101: |
memory allocation error. |
|
ERROR 103: |
cannot solve KW equations for Link |
|
ERROR 105: |
cannot open ODE solver. |
|
ERROR 107: |
cannot compute a valid time step. |
|
ERROR 108: |
ambiguous outlet ID name for Subcatchment |
|
ERROR 109: |
invalid parameter values for Aquifer |
|
ERROR 110: |
ground elevation is below water table for Subcatchment |
|
ERROR 111: |
invalid length for Conduit |
|
ERROR 112: |
elevation drop exceeds length for Conduit |
|
ERROR 113: |
invalid roughness for Conduit |
|
ERROR 114: |
invalid number of barrels for Conduit |
|
ERROR 115: |
adverse slope for Conduit |
|
ERROR 117: |
no cross section defined for Link |
|
ERROR 119: |
invalid cross section for Link |
|
ERROR 121: |
missing or invalid pump curve assigned to Pump |
|
ERROR 131: |
the following links form cyclic loops in the drainage system: |
|
ERROR 133: |
Node %s has more than one outlet link. |
|
ERROR 134: |
Node %s has illegal DUMMY link connections. |
|
ERROR 135: |
Divider %s does not have two outlet links. |
|
ERROR 136: |
Divider %s has invalid diversion link. |
|
ERROR 137: |
Weir Divider %s has invalid parameters. |
|
ERROR 138: |
Node %s has initial depth greater than maximum depth. |
|
ERROR 139: |
Regulator %s is the outlet of a non-storage node. |
|
ERROR 141: |
Outfall %s has more than 1 inlet link or an outlet link. |
|
ERROR 143: |
Regulator %s has invalid cross-section shape. |
|
ERROR 145: |
Drainage system has no acceptable outlet nodes. |
|
ERROR 151: |
a Unit Hydrograph in set %s has invalid time base. |
|
ERROR 153: |
a Unit Hydrograph in set %s has invalid response ratios. |
|
ERROR 155: |
invalid sewer area for RDII at node |
|
ERROR 156: |
inconsistent data file name for Rain Gage |
|
ERROR 157: |
inconsistent rainfall format for Rain Gage |
|
ERROR 158: |
time series for Rain Gage %s is also used by another object. |
|
ERROR 159: |
recording interval greater than time series interval for Rain Gage |
|
ERROR 161: |
cyclic dependency in treatment functions at node |
|
ERROR 171: |
Curve %s has invalid or out of sequence data. |
|
ERROR 173: |
Time Series %s has its data out of sequence. |
|
ERROR 181: |
invalid Snow Melt Climatology parameters. |
|
ERROR 182: |
invalid parameters for Snow Pack |
|
ERROR 183: |
no type specified for LID |
|
ERROR 184: |
missing layer for LID |
|
ERROR 185: |
invalid parameter value for LID |
|
ERROR 186: |
invalid parameter value for LID placed in Subcatchment |
|
ERROR 187: |
LID area exceeds total area for Subcatchment |
|
ERROR 188: |
LID capture area exceeds total impervious area for Subcatchment |
|
ERROR 191: |
simulation start date comes after ending date. |
|
ERROR 193: |
report start date comes after ending date. |
|
ERROR 195: |
reporting time step or duration is less than routing time step. |
|
ERROR 200: |
one or more errors in input file. |
|
ERROR 201: |
too many characters in input line |
|
ERROR 203: |
too few items |
|
ERROR 205: |
invalid keyword %s |
|
ERROR 207: |
duplicate ID name %s |
|
ERROR 209: |
undefined object %s |
|
ERROR 211: |
invalid number %s |
|
ERROR 213: |
invalid date/time %s |
|
ERROR 217: |
control rule clause out of sequence |
|
ERROR 219: |
data provided for unidentified transect |
|
ERROR 221: |
transect station out of sequence |
|
ERROR 223: |
Transect %s has too few stations. |
|
ERROR 225: |
Transect %s has too many stations. |
|
ERROR 227: |
Transect %s has no Manning's N. |
|
ERROR 229: |
Transect %s has invalid overbank locations. |
|
ERROR 231: |
Transect %s has no depth. |
|
ERROR 233: |
invalid treatment function expression |
|
ERROR 301: |
files share same names. |
|
ERROR 303: |
cannot open input file. |
|
ERROR 305: |
cannot open report file. |
|
ERROR 307: |
cannot open binary results file. |
|
ERROR 309: |
error writing to binary results file. |
|
ERROR 311: |
error reading from binary results file. |
|
ERROR 313: |
cannot open scratch rainfall interface file. |
|
ERROR 315: |
cannot open rainfall interface file |
|
ERROR 317: |
cannot open rainfall data file |
|
ERROR 318: |
date out of sequence in rainfall data file |
|
ERROR 319: |
invalid format for rainfall interface file. |
|
ERROR 321: |
no data in rainfall interface file for gage |
|
ERROR 323: |
cannot open runoff interface file |
|
ERROR 325: |
incompatible data found in runoff interface file. |
|
ERROR 327: |
attempting to read beyond end of runoff interface file. |
|
ERROR 329: |
error in reading from runoff interface file. |
|
ERROR 330: |
hotstart interface files have same names. |
|
ERROR 331: |
cannot open hotstart interface file |
|
ERROR 333: |
incompatible data found in hotstart interface file. |
|
ERROR 335: |
error in reading from hotstart interface file. |
|
ERROR 336: |
no climate file specified for evaporation and/or wind speed. |
|
ERROR 337: |
cannot open climate file |
|
ERROR 338: |
error in reading from climate file |
|
ERROR 339: |
attempt to read beyond end of climate file |
|
ERROR 341: |
cannot open scratch RDII interface file. |
|
ERROR 343: |
cannot open RDII interface file |
|
ERROR 345: |
invalid format for RDII interface file. |
|
ERROR 351: |
cannot open routing interface file |
|
ERROR 353: |
invalid format for routing interface file |
|
ERROR 355: |
mis-matched names in routing interface file |
|
ERROR 357: |
inflows and outflows interface files have same name. |
|
ERROR 361: |
could not open external file used for Time Series |
|
ERROR 363: |
invalid data in external file used for Time Series |
|
ERROR 401: |
general system error. |
|
ERROR 402: |
cannot open new project while current project still open. |
|
ERROR 403: |
project not open or last run not ended. |
|
ERROR 405: |
amount of output produced will exceed maximum file size; either reduce Ending Date or increase Reporting Time Step. |
